|
Product Details:
|
| Product Type: | Boom Arm | Compatible Machine: | Customized Tonnage Class Excavator |
|---|---|---|---|
| Maximum Reach: | 7-30 M | Sections: | 2-3 Sections |
| Main Material: | Q355B | Warranty: | 12 Months |
| MOQ: | 1 Set | Lead Time: | 5-30 Days |
| Monthly Capacity: | 100 Sets | ||
| Highlight: | custom ton excavator boom arm,7m boom arm Q355B,custom boom arm for ZX400 |
||
For rental fleets and dealers we produce this boom arm in matched batches for customized tonnage excavators. Reach is 7-30 m, weight is distributed to protect the swing bearing, and every set ships with the correct linkage pins and bushings.
Design details that matter on site: a reinforced boom foot, doubled side plates at the bucket end, greased pin joints and a hose routing that keeps lines clear of the cab. Main structure is Q355B, chosen for yield strength and low temperature toughness.
| MOQ | 1 set |
| Price | Negotiable |
| Monthly Capacity | 100 sets |
| Lead Time | 5-30 days |
| Brand | DF |
| Place of Origin | Guangdong, China |
| Certification | CE, ISO9001 |
| Product Type | Boom Arm |
| Compatible Machine | Customized Tonnage class excavator |
| Maximum Reach | 7-30 m |
| Sections | 2-3 sections |
| Main Material | Q355B |
| Surface Finish | Shot blasting and two component polyurethane paint |
| Warranty | 12 months |
Matching note: this set is built for ZX400 / ZX450 carriers and can be adjusted for other customized tonnage machines after drawing confirmation.
![]()
Boom sections are cut and welded in our Guangzhou workshop, then stress relieved before painting.
We are the manufacturer, not a middleman. The 3000 square meter workshop runs cutting, bending, jig welding by experienced welders, machining and painting in sequence, which is why we can hold 100 sets per month and still control weld quality.
Inspection happens at three stages: plate thickness and cut accuracy, weld appearance and penetration at critical joints, then final assembly and hydraulic test.
![]()
Main boom and stick are jig-welded to keep pin centres within tolerance on every unit.
The set is wrapped in stretch film, banded to a steel frame and loaded into a 20ft or 40ft container depending on reach. Production takes 5-30 days after drawing approval, shipped from Guangzhou or Shenzhen port.
Tell us the carrier model and reach you require, we will confirm drawing, price and delivery date the same day.
![]()
Reinforcement plates and pin bosses are fitted on our fabrication line before final assembly.
Sophie - Sales Manager | Defeng Machinery, Guangzhou
![]()
Contact Person: Chen
Tel: +8618026254557