|
Product Details:
|
| Operating Weight: | 19700 Kg | Engine Model: | Komatsu SAA6D102E-2 |
|---|---|---|---|
| Rated Power: | 107 KW / 145 PS | Bucket Capacity: | 0.8 M3 |
| Max Digging Depth: | 6920 Mm | Max Dump Height: | 7035 Mm |
| Track Shoe Width: | 600 Mm | Condition: | Used, Inspected |
| Highlight: | PC200-7 quarry excavator,20 ton loading digger,15200 kgf bucket force |
||
Loading blasted rock with a 20 ton machine is a wear question before it is a power question. The PC200-7 delivers 15,200 kgf at the bucket lip and 14,800 kgf at the arm, enough to break out fragmented limestone and granite without straining the stick.
This unit was maintained on a quarry support contract, so the grease record is complete and the boom foot area has no cracks. We have inspected the boom, arm and bucket linkage with a dye check on the high stress welds.
![]()
A 0.7 m3 rock bucket with reinforced shell and wear strips is the recommended match for blasted stone. A 0.8 m3 general bucket is fine for sand, gravel and crushed aggregate. Both are available, and we can fit a hydraulic breaker circuit on request.
| Specification | Figure |
|---|---|
| Model | Komatsu PC200-7 |
| Operating weight | 19,700 kg |
| Rated power | 107 kW / 145 PS at 2,000 rpm |
| Standard bucket | 0.8 m3 (0.48 - 1.5 m3 available) |
| Max digging height | 10,000 mm |
| Bucket digging force | 15,200 kgf |
| Travel speed | 3.0 / 4.1 / 5.05 km/h |
| Track shoe width | 600 mm |
| Machine type | Hydraulic crawler excavator, used |
| Engine model | Komatsu SAA6D102E-2, 4-cylinder turbo |
| Displacement | 5.883 L |
| Max digging depth | 6,920 mm |
| Max dump height | 7,035 mm |
| Arm digging force | 14,800 kgf |
| Swing speed | 12.4 rpm |
![]()
The machine ships with a set of spare filters, two spare teeth and a spare hydraulic hose kit. That is usually enough to reach the first scheduled service without waiting for parts.
Our stock covers used excavators across the common tonnage range and used bulldozers for bulk pushing work. If you need a second machine to match this one, tell us the model and we will confirm what is available.
Tell us the rock type and required output per shift, and we will recommend bucket size and tooth type.
![]()
Contact Person: Chen
Tel: +8618026254557