|
Product Details:
|
| Operating Weight: | 19700 Kg | Engine Model: | Komatsu SAA6D102E-2 |
|---|---|---|---|
| Rated Power: | 107 KW / 145 PS | Bucket Capacity: | 0.8 M3 |
| Max Digging Depth: | 6920 Mm | Max Dump Height: | 7035 Mm |
| Track Shoe Width: | 600 Mm | Condition: | Used, Inspected |
| Highlight: | PC200-7 foundation excavator,0.8 m3 bucket digger,deep pit crawler excavator |
||
Basement and foundation work rewards a machine that stays steady at depth. The PC200-7 carries its weight low, with a 19,700 kg operating mass spread over a 600 mm shoe, so the tail stays planted when the arm is fully extended into a pit.
At 6,920 mm maximum digging depth the machine handles two level basement pits without a bench. The 7,035 mm dump height clears a standard 3 m wall form and most site skips. For deeper pits we supply an extended arm front end on request.
![]()
The cab is the original Komatsu unit with adjustable suspension seat, sliding window and heater. Wiper, horn, travel alarm and working lights all function. Glass is free of cracks and the door latch closes properly, which matters on dusty sites.
| Parameter | Value |
|---|---|
| Model | Komatsu PC200-7 |
| Machine type | Hydraulic crawler excavator, used |
| Operating weight | 19,700 kg |
| Engine model | Komatsu SAA6D102E-2, 4-cylinder turbo |
| Rated power | 107 kW / 145 PS at 2,000 rpm |
| Displacement | 5.883 L |
| Standard bucket | 0.8 m3 (0.48 - 1.5 m3 available) |
| Max digging depth | 6,920 mm |
| Max digging height | 10,000 mm |
| Max dump height | 7,035 mm |
| Bucket digging force | 15,200 kgf |
| Arm digging force | 14,800 kgf |
| Travel speed | 3.0 / 4.1 / 5.05 km/h |
| Swing speed | 12.4 rpm |
| Track shoe width | 600 mm |
![]()
Boom and arm pin play, cylinder rod scoring, swing bearing play and track tension are measured and photographed. Any item outside tolerance is listed in writing before the machine is offered for sale.
Other used excavators and bulldozers are available from the same yard, including long reach, amphibious and standard configurations. Send us your requirement list and we will reply with stock, condition reports and prices.
Send the pit depth and soil type, and we will confirm whether the standard arm is enough for your site.
![]()
Contact Person: Chen
Tel: +8618026254557